Digital Product PEI Plastic Helical Gear

Fujian Digital Products PEI Plastic Helical Gears   Zhuhai Custom PFA Plastic Parts with High Precision

Advantages of Dongguan Dinghao Plastic Technology Co., Ltd.:
Years of technical experience ensure stable quality.
A wide range of products makes it convenient for customers to find what they need.
Knowledgeable sales consultants provide suitable solutions for you.
Continuously improving the internal supply chain information processing platform to ensure accurate handling of orders and customer requirements.
Promptly responding to after-sales needs or complaints, focusing on customer experience and satisfaction.
Large inventory in stock for quick delivery to meet urgent customer demands.

Name: Motor Gearbox

Model: MPT-00327

Mold Number: MPT-20112

Total Length: 55±0.5mm

Length: 50±0.5mm

Outer Diameter: 22±0.5mm

Diameter: 4±0.5mm

Material: PA6

Color: Black

Weight: 8g

Note: The above data is for reference only,

Please refer to the actual product,

Customization available with drawings or samples

Four Common Problems and Solutions in Plastic Mold Forming
Problem 1: Scorching Scorching is the premature vulcanization of plastic, where poor mold flow causes deformation or incomplete parts before the plastic flow is complete. To prevent or eliminate scorching, ensure the mold is fully filled before vulcanization begins and that the mold cavity is evenly heated.
Problem 2: Backflow This is the deformation of molded products at the mold parting line, often appearing as tears or rugged indentations. Backflow is usually caused by the sudden release of internal pressure when the mold opens. To prevent it, avoid rough or excessive openings at the parting line and maintain the molding temperature as low as possible with the vulcanizing agent used.
Problem 3: Entrapped Air Air trapped in the plastic mold or plastic can cause soft, discolored areas on the surface or cross-section of molded parts due to incomplete vulcanization. Solutions include the following four points: 1. Collapse the mold. 2. Increase the amount of vulcanizing agent. 3. Use high-temperature vulcanizing agents with lower air reactivity. 4. Vent at sharp corners and undercuts of the mold.
Problem 4: Surface Discoloration This is often due to excessive buildup of release agent in the plastic mold cavity or excessive dust or dirt in the preform. To prevent such issues, clean the mold regularly, keep preforms clean, and use release agents cautiously.